Characteristics of desulfurization, denitrification and dust collector: The desulfurization, denitrification and dust collector belongs to environmental protection equipment. A water jacket container is installed on the outer wall of the flue gas channel. According to the principles of aerodynamics and fluid dynamics, the flue gas and water entering the equipment are accelerated to collide, causing water to form small water droplets under the action of high-speed and high-temperature flue gas flow. The formation of small water droplets increases the contact area between flue gas and water. The dust, sulfur-containing oxides and alkali lime containing water in the flue gas undergo neutralization reaction to produce gypsum, which is then separated from the air through a separation layer to separate water and gypsum. The technical characteristics of desulfurization, denitrification, and dust removal equipment include: 1. Medium denitrification efficiency, low investment cost, and low operating expenses; 2. Not using expensive catalysts; 3. The solution injection can automatically adjust the injection amount according to the change of boiler load; 4. No need for large-scale renovation of the boiler, minimal impact on the boiler, and no need to replace the induced draft fan; 5. Short construction period and simple construction; 6. No secondary pollution is generated. The working principle of desulfurization, denitrification and dust collector: We understand that sulfur, nitrate and other substances have a great destructive effect on the ecological environment, so these substances cannot be directly discharged. Currently, desulfurization, denitrification and dust collectors are used for filtration, decomposing substances into substances or usable products. The desulfurization in desulfurization, denitrification, and dust removal equipment mainly refers to the use of ammonia water as a desulfurizer, which reacts to produce ammonium sulfate solution to control sulfur dioxide emissions. In practice, during this process, not only can sulfur dioxide gas be released, but also existing ammonium sulfate fertilizer products can be produced. Many manufacturers think that the cost of desulfurization, denitrification, and dust removal equipment is too high, but the actual situation is not always the case. It can still bring economic benefits to enterprises. Considerations for choosing a desulfurization, denitrification, and dust collector: In order to protect the environment, the use of desulfurization, denitrification, and dust collectors in industrial production has become a very common phenomenon. Below are the considerations for choosing a desulfurization, denitrification, and dust collector. During the long-term operation of the desulfurization and denitrification dust collector, it is inevitable that some faults will occur, which will have a great impact on the normal operation and efficiency of the desulfurization and denitrification dust collector. At this time, the maintenance of the desulfurization and denitrification dust collector is particularly important, not only to extend its service life, but also to reduce costs. Each dust removal system should be equipped with a testing instrument, which should be regularly stopped and recorded during daily operation. This can be determined based on the system's pressure difference, inlet and outlet body temperature, main motor voltage, current, and other values and changes, and promptly eliminate faults to ensure normal operation.
