Factors affecting the performance of dust removal skeleton: 1. The influence of the size of the dust removal skeleton: Among the geometric dimensions of the dust removal skeleton, the diameter of the dust removal skeleton, gas, and the shape and size of the exhaust pipe are important influencing factors. 2. The influence of gas parameters on the performance of dust removal skeleton includes the influence of gas flow rate, gas dust concentration, gas moisture content, gas density, viscosity, pressure, temperature, etc. 3. The influence of the physical properties of dust on the dust removal skeleton. 4. The influence of the roughness of the inner wall of the dust removal skeleton: Dust particles concentrated near the wall surface will cause swirling due to the rough surface, causing some dust particles to be thrown into the rising airflow and enter the exhaust pipe, reducing the dust removal efficiency. Precautions for dust removal skeleton production: 1. Use imported equipment for processing and manufacturing. 2. The personnel carry out one-time welding work to ensure a smooth and even surface of the product, with the aim of avoiding excessive welding points, scars, and other wear on the filter bag, resulting in waste of the filter bag. 3. Made by welding 201, 304, 316L stainless steel wire, this material has good performance and long service life. 4. Adopting a detachable assembly design reduces the number of replacement parts and makes operation and maintenance convenient. 5. If the user specifies their needs in advance, the manufacturer can customize stainless steel dust removal skeletons in various shapes. Precautions for purchasing dust removal frame: The function of the dust removal frame is to support the interior of the dust removal bag, facilitate fixation, and prevent the collapse of the dust removal bag during use. Bag collapse will reduce the dust removal effect of the entire equipment. So, if the bag is the heart of the entire bag filter, then the dust removal skeleton is the spine of the bag. Only by selecting appropriate dust removal frameworks and matching dust removal equipment can the role of the dust collector be maximized. Therefore, when customers purchase dust removal skeletons, they are reminded not to choose the 5 standards for dust removal skeletons. 1. The dust removal framework needs to have sufficient rigidity and strength to withstand the pressure that the bag is subjected to during operation. 2. It is necessary for each ring and tendon to be evenly distributed to prevent skeletal deformation caused by normal collisions, impacts, etc. 3. Each welding point of the dust removal skeleton should be firm. Once there is detachment or virtual welding, which leads to deformation of the skeleton during welding, it can cause the bag to loosen, fall off, or block. 4. The outer surface of the dust removal skeleton should be smooth. If there are burrs or uneven areas, it may cause the bag to wear out too quickly due to the constant change of pressure during use. 5. In addition to being smooth, the surface of the dust removal skeleton also needs to be treated, and this treatment depends on the type of industry in which the skeleton is to be used. The quality of the dust removal framework directly affects whether the entire equipment can be put into normal operation. If the selection is not appropriate, the service life of the bag filter will be greatly shortened as a result. If the skeleton can be properly selected during the selection process, it can significantly extend the service life of the dust removal equipment. Therefore, selecting a suitable dust removal framework and performing regular maintenance is also a task for dust collector equipment.
