Let me introduce the dust removal filter bag to you; How to clean it up
1. Dust removal: High frequency vibration is used to remove all larger dust particles that enter the filter bag wall, without affecting the entanglement fastness of the fibers, maintaining the good condition of the filter bag and the easy detachment of dirt.
2. Chemical experiment processing: Extract bag samples, use instrument analysis to detect the oil pollution components of filter bags, and select suitable washing materials to clean the filter bags to the maximum extent without causing any damage to them.
3. Soaking: Use appropriate chemical agents to soak the filter bag, remove oil stains and dirt from the gaps of the filter bag, and maximize the breathability of the filter bag.
4. Cleaning: Select appropriate washing materials and strictly mix them. Low temperature water cleaning, uniform water flow, moderate strength, no mechanical damage to the filter bag.
5. Drying: Hot air at around 110 degrees Celsius is used for drying to maintain the dimensional stability of the filter bag. After drying, the filter bag does not deform or shrink. In pulse and gas box pulse dust collectors, dust adheres to the outer surface of the filter bag. When the dusty gas passes through the dust collector, the dust is trapped on the outer surface of the filter bag, while the clean gas enters the inside of the filter bag through the filter material. The cage inside the filter bag is used to support the filter bag, prevent it from collapsing, and at the same time, it helps to redistribute the dust cake.
5. High reuse rate for damaged filter bags caused by abrasion, holes, etc. due to use.
6. Testing: Physical indicators of the cleaned filter bag are tested using instruments to ensure that the cleaning quality meets the requirements. After the above processes of processing and cleaning, the filter bag can meet the requirements for use.
http://www.hbfxhb.com
