Hello everyone, the editor will summarize several maintenance methods for dust removal equipment;, If we do not pay attention to maintenance or use incorrect methods, it can cause many serious consequences that we cannot predict. Some serious consequences are simply irreparable, so proper maintenance of dust removal equipment is very important.
1. The operating environment temperature of ordinary industrial vacuum cleaners should not exceed 40 degrees Celsius, and the workplace should not be above an altitude of 1000 meters. There should be a good ventilation environment, and the air should not be used in a dry indoor environment with flammable or corrosive gases.
2. When using the dust collector, please note that it is strictly prohibited to use the machine in flammable and explosive places. If the filter bag is not made of materials, it cannot absorb flammable flames and warm waste. The equipment is strictly prohibited from use without its filter and dust bag, otherwise it will directly cause damage to the fan.
When using an industrial vacuum cleaner equipped with an automatic winding device, simply pull out the power cord to a sufficient length for use. Do not pull the power cord over. If you see a yellow or red mark on the power cord, stop pulling it out immediately to prevent it from being pulled too far. If you need to retract the power cord, simply press the button to automatically retract it.
4. The types of dust removal equipment are complex, with different models, specifications, structural performance, and functional characteristics. Before use, it is necessary to carefully read the instruction manual to avoid any potential issues
Improper formation of damage to industrial vacuum cleaners and crisis of use by personnel.
5. Connect the ground wire and use electricity. A typical industrial vacuum cleaner works continuously for no more than 8 hours each time, mainly to prevent the motor from overheating and burning out. And there is a design of industrial vacuum cleaners that, due to the use of a cooling system, can work continuously for 36 hours without stopping, and can be used in conjunction with machine tools.
If the electromagnetic pulse valve malfunctions, it should be promptly cleaned. If there are impurities or moisture inside, it should be sorted out. If the diaphragm is damaged, it should be replaced in a timely manner.
7. Do not excessively expand or bend the industrial vacuum cleaner hose or frequently fold it back and forth, as it will affect the service life of the industrial vacuum cleaner hose.
When the dust removal equipment accessories are working normally, the ash discharge equipment cannot stop working. Otherwise, the ash hopper will quickly accumulate dust, causing it to overflow into the bag chamber and forcing the dust removal accessories to stop working.
When the machine is not in use, it should be placed in a ventilated and dry place. Industrial dust collectors that do not support long-term continuous operation should control the continuous working time within the working time supported by the industrial dust collector, and should not work beyond the load, otherwise it will affect the service life of the industrial dust collector.
10. If the main unit of the dust removal equipment heats up, has a burnt smell, or the industrial dust collector shakes and makes abnormal noises, it should be stopped immediately and sent for repair. Do not overload the industrial dust collector.
11. Dry dust collectors are not allowed to absorb water, and wet hands are not allowed to operate the dust collector. If there are large paper balls, plastic cloths, or waste materials larger than the diameter of the straw that need to be cleaned, they should be cleaned in advance, otherwise it is very easy to cause straw blockage.
12. The oil-water separator in the air storage tank and gas source triple component should be drained once per shift, and the oil-water separator should be cleaned every 3-6 months. The oil mist device should be checked for oil storage status regularly and refilled in a timely manner.
When using an industrial vacuum cleaner equipped with an automatic winding device, simply pull out the power cord to a sufficient length and do not pull it over. If you see a yellow or red mark on the power cord, stop pulling it out immediately to avoid pulling it too far. If you need to retract the power cord, simply press the button to automatically retract it.
I hope the above introduction can be helpful for your future use. If you would like to know more about our other products, please feel free to call us for consultation!
