In the blink of an eye, autumn has arrived, and our company's production and sales are also going on one by one. Today, the editor will introduce the dust cleaning method of the filter cartridge dust collector to our customers:
Traditional filter cartridge dust collectors have two cleaning methods, one is high-pressure air flow back blowing, and the other is pulse air flow blowing. Practice has shown that the former has the advantage of uniform air flow, but the disadvantage is high air consumption; The advantage of the latter is low gas consumption, but the disadvantage is weak airflow.
Two improvements can be made for this: on the one hand, a guide device can be added to the pulse blowing tube to enhance the airflow induction effect, and on the other hand, the upper guide duct of the filter cartridge can be removed to allow both pulse airflow and induced airflow to fully enter the filter cartridge at the same time.
After this improvement, the air consumption is reduced, the airflow is uniform, and the dust cleaning effect is good. According to calculations, the dust cleaning airflow flow rate after the technical improvement is 3-5 times that of the pulse airflow.
The above is the cleaning method of the filter cartridge dust collector. We hope it will be helpful to our users.
这是我公司生产的滤筒除尘器的照片。
