When using the filter cartridge dust collector produced by Hebei Feixiang Environmental Protection Equipment Co., Ltd., the following precautions should be taken:
1. When using a filter type dust collector, it is necessary to check the direction of fan rotation and bearing vibration. If the temperature is too high or the bearing rotation speed is too high, it cannot meet the requirements.
2. The filter type dust collector uses rated processing air to conduct pressure tests on each testing point, and the data is consistent with the regulations.
3. The filter element needs to be judged based on the smoke exhaust situation through the chimney. If there is any falling, loosening or wear, it should be replaced and repaired in a timely manner. When the dust filter needs to be replaced, the machine runs continuously, isolates each room, and then replaces them separately. Be careful when disassembling and installing the filter, as there is a small amount of negative pressure on the filter. Be careful not to drop the filter into the ash hopper.
4. It is necessary to control the temperature of the filter cartridge to prevent condensation caused by excessive temperature differences, as well as to prevent corrosion, blockage, and abnormal operation.
I hope the above can help consumers.
这是我们公司生产的滤筒除尘器的产品图片。
