LDDM long bag pulse bag dust collector; It consists of a shell, ash hopper and ash unloading mechanism, inlet and outlet air box body, pulse ash cleaning device, compressed air pipeline and its pressure reducing device, ladder platform and railing.

Technical characteristics of LDDM long bag pulse bag dust collector:

1. The dust collector of the kiln body adopts a single row and upper part of the ash hopper for air intake. The air intake is evenly distributed on the surface of the filter bag through a guide plate, avoiding direct impact of the air intake on the filter bag and extending its service life.

2. Considering the good dust cleaning effect, each compartment of the dust collector adopts a single compartment single ash hopper, and each compartment is separated by partitions to prevent cross ventilation during single compartment dust cleaning or maintenance.

3. The top of the dust collector is equipped with an inspection door for maintenance and bag replacement (the maintenance, inspection, and bag replacement work of the dust collector can be carried out outside the machine without entering the interior of the dust collector).

4. The long bag offline pulse bag dust collector is equipped with an air inlet guide device at the air inlet;

LDDM long bag pulse bag dust collector; It is a filtering dust removal equipment based on the filtering principle, which uses fiber or inorganic fiber filter cloth to filter out dust in the gas The dust removal process involves the entry of dust containing gas into the middle box through the air inlet, and then into the bag from outside. The dust is blocked on the surface outside the filter bag, and the purified air enters the bag. It then enters the upper box through the upper part of the bag and is discharged through the exhaust pipe The bag filter adopts offline dust cleaning as a means to avoid secondary adsorption of dust and improve dust cleaning efficiency Among them, the dust collector purification chamber is designed as a small chamber. During the operation of the dust cleaning system, one chamber participates in offline dust cleaning, and closing the filtration area of one chamber has little effect on the entire system Can ensure the long-term stable operation of the dust collector With the development of bag dust removal technology and the increasing demand for environmental protection, the application scope of bag dust collectors is becoming more and more extensive.

Maintenance and upkeep of LDDM long bag pulse bag dust collector:

1. Determine the regular maintenance time for ash discharge based on the dust volume of the dust collector.

2. Determine the regular discharge of accumulated water based on the water accumulation in the air bag.

3. Regularly check whether the pulse dust cleaning system of the dust collector is working properly. If it is not working properly, focus on checking the loss of the pulse valve diaphragm and whether the electromagnetic pulse valve is malfunctioning, and replace it in a timely manner. The filter bag should be cleaned in a timely manner and replaced regularly.

4. Regularly check whether the equipment is operating normally based on changes in resistance and fluctuations.

5. Regularly check the usage of vulnerable parts according to the list of vulnerable parts.

6. Regularly lubricate the lubrication components of the equipment, change the lubricating oil of the gearbox every six months, and replenish the bearing lubrication points once a week.

7. Pay attention to checking the sealing degree of the electric control box to prevent water and dust from entering, and regularly clean the accumulated dust inside the electric control box.