Maintenance of filter cartridge dust collectors: In recent years, with the continuous development of technology, more and more dust collectors have been produced, among which filter cartridge dust collectors are widely used in industries such as food, cement, and chemical. Post filter dust collectors are prone to breakage, so the maintenance and upkeep of cylindrical filters are particularly important. Here is a brief introduction to the maintenance and upkeep of filter element dust collectors: Regular maintenance and upkeep are carried out during the use of cylindrical dust collectors. The feed control of the cylindrical filter is good, and stopping grinding can prolong the shutdown time as much as possible. High moisture content materials should be stopped first, and the ventilation time of the rolling mill should also be extended. The filter element of the dust filter requires oil-water separation, regular cleaning, and inspection of the degree of blockage in the filter bag. If slight blockage is found, it should be promptly removed to avoid a vicious cycle. At the same time, the atomization effect of the filter cartridge grinding machine is good, and the filter cartridge stops moisture in a timely manner to avoid moisture evaporation, which affects the filter bag and extends the service life of the filter bag. The regular inspection of the filter cartridge dust collector wastewater treatment system also ensures external insulation of the exhaust system due to comprehensive blockage. When using a filter bag filter, it is also necessary to check the opening and closing of the internal air duct of the bag filter, and control the air flow during cleaning. If the filtration speed is too fast, the amount of dust discharged will also increase, and the initial dust layer will be damaged, as well as the impact of dust bags caused by excessive wear. If the cleaning frequency of the bag is too high at this time, it is easy to cause loose fabric filter bags, which will exceed the standard dust emissions. Therefore, we should pay attention to maintaining the filtration speed. Characteristics of filter cartridge dust collector: 1. Adopting a protection device to prevent motor overcurrent and overload, with high performance; 2. Equipped with fully automatic pulse control dust cleaning function, clean the filter cartridge; 3. Suitable for production workshops with limited space or requiring frequent movement; 4. The product is equipped with adjustable casters, which can be easily moved in different workplaces; The filter cartridge dust collector is suitable for various industries such as machinery, furniture, electronics, footwear, etc. It is used for cutting, welding, grinding, sandblasting, and polishing operations. The double-layer effect of filter cartridge dust collector: 1. Scope of application of filter cartridge dust collector: This product is very popular in industry and is widely used in steel metallurgy, non-ferrous metallurgy, building cement, mechanical casting. It also has the same effect in daily life. The purification and treatment of industrial dust in industries such as grain light industry, daily chemical industry, tobacco, storage terminals, industrial power plant boilers, heating boilers, and urban waste incineration can all be cleaned by filter cartridges. 2. Advantages of jet cleaning technology: One pulse valve can simultaneously blow one column (with a maximum of 12 filter cartridges per column), which can reduce the number of pulse valves. 3. The advantage of the pulse valve three state dust cleaning mechanism is that it adopts PLC automatic control and has the option of timing or manual control. 4. The practical advantages of a filter cartridge dust collector are that it occupies a small three-dimensional space per unit filtration area and can save users a lot of space resources, indirectly reducing their one-time investment costs. In addition, different combinations of filter cartridges with different columns and rows can be used according to the installation space requirements. 5. Advantages of service life: The service life of the filter cartridge can reach 2-3 years, which reduces the number of times the filter cartridge and dust collector need to change the filter element (traditional bag dust collectors change the filter element every 6 months on average), simplifies maintenance, and reduces maintenance costs for users during use. 6. The advantage of a filter cartridge is that the shaking of the filter material is relatively small during dust cleaning, which will far exceed the service life of the filter bag. Secondly, a vertical filter cartridge structure is adopted, which facilitates dust adsorption and cleaning, and has low maintenance costs. 7. Advantages of dust cleaning: Adopting the current offline three state (filtration, dust cleaning, static) dust cleaning method avoids the phenomenon of "re adsorption" during dust cleaning, enabling dust cleaning. 8. The advantages of pre dust collection mechanism: not only does it increase the dust concentration at the inlet of the filter, but it also overcomes the disadvantage of direct erosion of the filter cartridge by dust. 9. The advantages of key components in filter cartridge dust collectors are that they use components that affect the main performance, such as pulse valves, and the service life of their vulnerable parts, such as membranes, exceeds one million times.
