There are three factors that affect the pressure loss of desulfurization and denitrification dust collectors: the pressure loss of desulfurization and denitrification dust collectors refers to the pressure drop or resistance of gas from the dust collector to the outlet. The pressure loss of a desulfurization, denitrification, and dust collector depends on the following three factors, and we hope that everyone can read the following carefully. 1. Pressure loss of desulfurization, denitrification and dust collector structure. 2. Pressure loss of filter material. It is related to the properties of the filter material. 3. The pressure loss of the dust layer accumulated on the filter material. The desulfurization, denitrification and dust collector has high economic benefits: the desulfurization, denitrification and dust collector has high social and economic benefits. It has broad prospects in the field of desulfurization, denitrification, and dust removal in industrial boilers and industrial kilns. Why would the editor say that? Of course, it's not fictional. The desulfurization, denitrification and dust collector starts with improving the absorption rate, the degree of gas-liquid two-phase dynamic function, and the continuous alternation of gas and liquid phases, which is conducive to the mass transfer reaction process of exhaust gas. At the same time, it also has low airflow resistance and high exhaust gas treatment intensity. In addition, the desulfurization, denitrification and dust collector has the advantages of reasonable structure, easy operation, convenient use, and small footprint. Currently, in the treatment of industrial waste gas, the superiority of this technology ranks among various wet desulfurization and dust removal methods. Equipped with a dehydration and defogging device, the fan can dehydrate without water or dust. Various alkaline desulfurizers can be used for desulfurization, denitrification, and dust removal, which can be locally sourced. Low power consumption, does not increase the power of the fan, and can also reduce resistance, thereby achieving good economic benefits. The importance of air volume processing in desulfurization, denitrification, and dust collectors: Air volume processing refers to the volume of gas that the dust removal equipment can purify per unit time. Air volume processing is one of the main technical parameters of desulfurization, denitrification, and dust collectors, and is highly concerned by users. Below, we will introduce the importance of handling air volume in desulfurization, denitrification, and dust collectors. The unit of air volume for desulfurization and denitrification dust collectors is cubic meters per hour (m3/h) or standard cubic meters per hour (Nm3/h), which is one of the important factors in the design of desulfurization and dust collectors. When designing or selecting a desulfurization and dust collector based on air volume, it is generally not allowed to operate the dust collector beyond the specified air volume. Otherwise, the filter bag is prone to clogging, the service life is shortened, the pressure loss increases significantly, and the dust removal efficiency also decreases; But the air volume should not be chosen too high, otherwise it will increase equipment investment and land occupation. Considerations for choosing a desulfurization, denitrification, and dust collector: In order to protect the environment, the use of desulfurization, denitrification, and dust collectors in industrial production has become a very common phenomenon. Below are the considerations for choosing a desulfurization, denitrification, and dust collector. During the long-term operation of the desulfurization and denitrification dust collector, it is inevitable that some faults will occur, which will have a great impact on the normal operation and efficiency of the desulfurization and denitrification dust collector. At this time, the maintenance of the desulfurization and denitrification dust collector is particularly important, not only to extend its service life, but also to reduce costs. Each dust removal system should be equipped with a testing instrument, which should be regularly stopped and recorded during daily operation. This can be determined based on the system's pressure difference, inlet and outlet body temperature, main motor voltage, current, and other values and changes, and promptly eliminate faults to ensure normal operation.
