The activated carbon adsorption tower produced by our company is a purification equipment with good effects on treating exhaust gas and odor. Activated carbon adsorption is a measure to remove odors, synthetic solutes, and micro pollutants from water.
Most larger molecules, aromatic compounds, halogenated alkynes, etc. can be firmly adsorbed on the surface or in the pores of activated carbon, and have significant removal effects on humic substances, synthetic substances, and low molecular weight substances Activated carbon adsorption, as a purification process, is often used for the final treatment of wastewater and can also be used for the purification of long-term production water and domestic water.
When there is a large amount of dust and particulate matter, the activated carbon adsorption device can be used simultaneously with the water curtain machine, water spray tower, and UV plasma to achieve exhaust gas purification and emission standards.
The activated carbon adsorption device mainly consists of an activated carbon layer and a support layer.
Activated carbon has developed pores, a large specific surface area, and high adsorption capacity. It is precisely because of this characteristic of activated carbon that it is widely used in water treatment, such as domestic water supply, sewage treatment in the later stage (purified water), etc.
The dusty gas is powered by a fan and enters the tower under positive or negative pressure. Due to the presence of unbalanced and unsaturated molecular or chemical forces on the solid surface of activated carbon, when the solid surface comes into contact with the gas, it can attract gas molecules, concentrate and maintain them on the solid surface, and adsorb pollutants. After passing through a filter, the exhaust gas enters the equipment's dust removal system to purify the gas and meet high-altitude emission standards.
The characteristics of the activated carbon adsorption box produced by our company are: 1. Adsorption, large adsorption capacity, and wide applicability
2. Easy maintenance, no technical requirements
3. Large specific surface area and good selective adsorption
4. Activated carbon has the characteristics of wide sources and low cost
5. Adsorption,
6. Easy to operate
After using activated carbon for a period of time, a large amount of adsorbate is adsorbed, gradually approaching saturation and losing its working ability. In severe cases, it may penetrate the filter layer, so activated carbon should be replaced or replaced. High filtration speed, large processing capacity, stable operating effect, and minimal equipment footprint;
The filter material has a large capacity for intercepting pollutants, high porosity, friction resistance, and moderate specific gravity The main considerations for selecting exhaust gas treatment are: air volume, gas temperature, installation height, temperature of the operating environment, and the need to handle the defogging device in front of the air inlet.
If the above is done correctly, then it can meet the emission standards for exhaust gas and easily cope with environmental protection.
