The 5000 air flow photo oxygen purifier and UV photo oxygen dust collector can remove major pollutants such as volatile organic compounds (VOCs), inorganic substances, hydrogen sulfide, ammonia, thiols, as well as various odors. The deodorization efficiency can reach over 90%, exceeding the emission standards for odor pollutants. The photo oxygen dust collector does not require the addition of any substances: only the corresponding exhaust pipes and exhaust power need to be set up to allow odorous gases to pass through the equipment for deodorization, decomposition and purification, without the need to add any substances to participate in chemical reactions. Strong adaptability: It can adapt to atmospheric volume and the deodorization and purification treatment of different odorous gases. It can work continuously 24 hours a day and operate stably. Low operating cost: This equipment has no mechanical action, no noise, no need for dedicated management and daily maintenance, only requires regular inspections. The energy consumption of this equipment is low (only about 0.1 kWh of electricity is consumed per 1000 cubic meters/hour of processing), and the wind resistance of the equipment is less than; 30pa can save a lot of energy consumption in exhaust power. No pre-treatment required: Odorous gases do not require pre-treatment, such as heating, humidification, etc. The equipment can work normally in an environment temperature between -30 ℃ -65 ℃ and humidity between 40% -90%. This device has a small footprint and light weight: suitable for compact layout, narrow space and other conditions, with a footprint of less than; 1 square meter/processing 10000m3/h air volume. Material manufacturing: stable performance and long service life.

5000 air flow photo oxygen purifier, using 20 UV lamps, one peptide dioxide board, with dimensions of 1650 * 1000 * 1320mm in length, width, and height. After the odorous gas is input into the purification equipment through the exhaust device, the purification equipment operates a UV ultraviolet beam and ozone to synergistically decompose and oxidize the odorous gas, causing its degradation and conversion into low molecular weight compounds, water, and carbon dioxide, which are then discharged outdoors through the exhaust duct.

Environmental protection equipment for photocatalytic exhaust gas treatment, product advantages

1. Purification and stable operation;

2. Compact structure, novelty, small size, light weight, modular structural design;

3. Noise less than 45db (A), wind resistance less than 300 Pa;

4. Low operating costs and low power consumption;

5. Easy maintenance and long service life;