The dust removal frame is the rib of the filter bag, which should be lightweight, easy to install and maintain. The quality of the frame directly affects the filtration status and service life of the filter bag. The frame manufacturing equipment introduced by our company can produce frames that meet the requirements of lightness, smoothness, and straightness, with an annual production capacity of 1.5 million pieces.

Dust removal skeleton cleaning cycle and time: The principle for determining the cleaning cycle and cleaning time is to adopt different cleaning settings according to different cleaning methods. The first consideration is to ensure that the next adhesion layer can remain on the filter bag, so as to determine the cleaning cycle with less cleaning time. Make the cleaning cycle as long as possible and the cleaning time as short, so that it can operate under economical dust removal equipment resistance conditions. The dust removal skeleton is used and operated according to the working principle and method in the actual dust removal process. The environmental hygiene in the actual use environment has good use effect and value. The cleaning cycle and time of the dust removal skeleton are related to factors such as the cleaning method adopted and the properties of the treated object. Therefore, the dust properties, dust concentration, etc. should be understood and tested before determining. The cleaning cycle and cleaning time of the dust removal skeleton are important factors that affect the capture performance and operating status.

It is quite difficult to fix the position of each workpiece and component during welding joints of large structural components under the effects of self weight and welding stress. So, in addition to fixing the position with a welding platform, each welded workpiece and part also needs to be clamped with a welding fixture to prevent deformation of the workpiece. In most cases, by adopting appropriate welding node construction design measures and technical measures, the welding deformation of steel structures can be controlled to achieve the goal of engineering quality. However, due to the complexity and variability of materials, structures, and welding construction site environments, it is necessary to continuously summarize and accumulate welding experience in practice, and improve the technical level of controlling welding stress and welding deformation.

The dust removal skeleton can be used according to normal usage conditions and principles in actual operation, and can produce important effects and value in the actual dust removal effect. It is not affected by factors and can produce good performance and value in complex environments. The influence of cleaning cycle and cleaning time on bag filter. During operation, it is necessary to regularly observe the pressure difference system to determine if there are any problems. The pressure difference value during normal operation should be recorded in advance. If a pressure difference is found, it may indicate that the filter bag is clogged, dust is compacted, the cleaning mechanism is malfunctioning, or there is excessive ash accumulation in the ash hopper. A decrease in pressure difference may indicate damage or detachment of the filter bag, blockage of the inlet side pipeline or valve closure, or leakage between the box or compartments.