Dual axis humidifier; Mainly including DSZ single axis dust humidifier, SJ dual axis dust humidifier, vertical dust humidifier, horizontal dust humidifier, etc., various types of humidifiers. The dual axis dust humidifier mixer is a device that sprays water to stir and mix powdered materials.

Advantages of dual axis humidifier products:

1. The stirring rod is made of iron-based alloy or composite ceramic, with a long service life.

2. High output (can mix and humidify 200t per hour), uniform humidification, and work.

3. This machine has flexible layout, with two forms of chain transmission and direct connection. The transmission mechanism adopts a cycloidal reducer.

4. The atomization nozzle and adjustable water supply system can evenly humidify materials.

5. The shaft seal adopts a combination of multi slot labyrinth and packing for sealing, and the wear on the shaft is light.

6. The inner lining of the shell is made of iron-based alloy to avoid material self flow caused by excessive clearance after wear.

7. By adding a vibration system, it overcomes the problem of wall adhesion caused by the handling of viscous dust, improves the adaptability of the humidifier, and expands its application range. And the shell and base are connected elastically, so that vibration has no effect on the whole machine.

The advantage of using a dual axis structure in a dual axis humidifier is that it stirs, the system is tightly sealed, and there is no fly ash flying out. The reducer has a compact structure, small footprint, smooth transmission, low noise, uniform mixing, good blades, easy operation and maintenance, and runs. The blades are made of high manganese steel structure, and the equipment has a longer service life than traditional equipment.

The dual axis dust humidifier consists of four parts: uniform feeding, blade feeding, mixed impact humidification, vibration system, and is equipped with an electronic control and water supply system. The equipment is fixed on the base as a whole, and the cylinder is supported by four sets of elastic elements. Through the excitation device, vibration is applied to the cylinder, causing high-frequency vibration during the operation of the whole machine. The gap between the cylinder wall and the mixing shaft is always maintained, greatly reducing the resistance to the operation of the whole machine, eliminating the phenomenon of stagnation and stalling, reducing the downtime for cleaning, and improving work efficiency.