Dust humidifier; Advantages:

1. This product has a small volume and can be independently developed into a system based on on-site conditions. It is suitable for supporting installation in new factories and can also be used to upgrade old factories without damaging existing equipment;

2. Humidification averaging can solve practical problems in industrial production on a large scale, such as flying flowers, broken ends, static electricity, roughness, and fiber fragility in textile production;

3. The energy consumption index of unit humidification is low, and the energy consumption of ultrasonic humidification is only 0.05 kW/(kg. h), which is only 1/10~1/15 of other humidification methods, and the daily operating cost is low;

4. The atomization component adopts an integrated atomization movement and a fully sealed structural design to achieve the goal, and enables the atomization plate to be replaced and maintained immediately on site, solving the problems of early ultrasonic humidification systems being prone to damage, short lifespan, and complicated maintenance;

5. The integrated atomization movement comes with a water protection device, which can automatically stop working when the water level is too low, without the need for additional equipment, saving costs.

Precautions for installation of dust humidifier to avoid affecting its working efficiency:

The installation instructions for the dust humidifier, I hope everyone can remember: first, the dust humidifier should be installed on a concrete foundation, and the allowable horizontal deviation of the longitudinal and transverse directions of the machine body is 0.6 ‰; Secondly, check the integrity of the components and clean them; Correct the misalignment and adjust the bearing clearance. Afterwards, check if there is any lubricant in the bearings of the product. If the grease has deteriorated, it should be replaced again.