Submerged flow filter cartridge dust collector; Under normal operation, dusty air enters the HR type dust collector through the top inlet, and then disperses downwards through the guide plate before passing through the filter element. The dust is blocked on the outer surface of the filter element, and the filtered clean air enters the clean air chamber through the center of the filter element and is discharged through the outlet pipe.

The filter element of the sinking flow filter cartridge dust collector can automatically and intermittently clean the dust by offline cleaning of a set (2) of filter elements at any given time.

During the cleaning process of the filter element in the sinking flow filter cartridge dust collector, the pulse controller connects to the power supply of an electromagnetic pulse valve, causing the corresponding thin film valve to spray pulse high-pressure air. The high-pressure air passes through the filter element from inside to outside, removing the dust attached to the outer surface of the filter element. The dust particles fall into the dust hopper and then enter the ash collection bucket.

Submerged flow filter cartridge dust collector; The pressure of compressed air can be adjusted to 6kg/cm2, and the pressure of compressed air between 6kg/cm2 and 7kg/cm2 is the standard setting value that can meet the requirements of dust cleaning function. The smaller the set value of compressed air pressure, the smaller the air consumption of the pulse valve. The pulse jet control device can generally be adjusted to clean a row of filter elements every two minutes, that is, to connect a pulse valve every two minutes. To increase the energy of the ash, the compressed air pressure can be increased, but it should not exceed 7kg/cm2.